Polyester Water Clear Casting Resin is a two part casting resin that is water clear when cured. This advanced resin formula is UV stable, resistant to shrinkage and easy to use.It is ideal for rapid prototyping, embedding or any type of clear casting.FeaturesOptically clearUV stablePolish-able to a high glossLow viscosityEasily pigmentedFast curingThe clear polyester casting resin is perfect for object embedding (including electronic components, LEDs) creative embedding, rapid prototyping or any type of casting where an ultra clear or coloured translucent part is required. The resin can be used with or without vacuum degassing, however for best results we recommend vacuum degassing the resin.This pigment is to be mixed at a ratio of 2-3 grams per 100 grams of resin. This pigment will make the resin or neutral based gelcoat turn the solid pigment color. If you mix the dye in the resin then you can achieve the color you need right away and it will go all the way to the part instead of just being a surface coat. There are many uses for these dyes and they are a very useful tool in the composite workshop. Please note that polyester casting resin has a very strong smell compared to epoxy casting resins. Work in a well ventilated room or wear appropriate protection while using it.Kit includes 500g Clear casting resin and 50ml MEKP hardener, 1 set of pigments, 2 mixing sticks and 2 pairs of nitrile gloves and instruction manual.
Kit I: Yellow + Light green
Kit II: Red + Light blue
Kit III: Pink + Grey
Kit IV: Peach + Navy blue
Kit V: Orange + Violet
Please note that the resin has a shelf life of only 3 months from the date of purchase at 25°C
Instructions manual can be downloaded from :https://www.carbonblackcomposites.in/downloads